If you’ve ever owned a pool, then you know that they’re not the most low-maintenance thing in the world. You need to be constantly adding chemicals to it to keep it clean and safe for swimming. And if you’re having any problems with algae or dirt, then your pool may need shock treatment. But what is a shock treatment? And can I shock pool after adding baking soda?
Some people say you can’t shock your swimming pool after adding baking soda, while others say it’s perfectly fine. So what is the truth?
The purpose of this blog post is to answer the question, “can I shock pool after adding baking soda?” For this and more tips, read on!
What is a shock treatment?
Shock treatment is the process of adding a large amount of chlorine to the pool. You can do it by dumping in chlorine tablets, pouring in liquid chlorine, or adding an automatic chlorinator.
The idea behind shocking your pool is to restore the sanitizing power that has been lost over time. With the right balance, the water will be clean and clear.
Can I shock my pool after adding baking soda?
The answer is “yes.” You can shock your pool after adding baking soda! Still, it depends on how much baking soda you used to clean the pool.
You see, shock treatment requires balanced pH level of 7.2 to 7.8 for chlorine to work effectively. Well, baking soda is a pH increaser. With a pH of 8, it helps restore the balance by increasing alkalinity level.
But how much baking soda or sodium bicarbonate do you need to restore balance?
The dosage is 1.5 pounds of baking soda per 10,000 gallons of water. However, if your pool pH level is below 7.2, increase the dosage to 3-4 pounds of sodium carbonate per 10,000 gallons.
The best way to add soda ash is by using a skimmer or sprinkler canister. Simply attach the sprinkler canister to the skimmer opening of your filter system and pour enough baking soda in so it filters through the water. To get maximum results, leave the sprinkler on for 6-8 hours during the day.
However, before shock treatment, you should wait at least 6 hours for soda ash to disperse and dissolve in the water.
How to shock your pool
One of the easiest ways to shock your pool is by adding chlorine or bromine tablets. This will raise chlorine or bromine levels in the water, which will kill any bacteria and algae. Another way to shock your pool is by using liquid chlorine bleach.
Before shocking your pool, know how much water it holds. Also, check the current chlorine level and ensure the pH is balanced (7.2-7.8). It’s always good to check the level of cyanuric acid as it helps stabilize both pH and chlorine.
The next step is to choose your pool shock. You can choose liquid chlorine, popularly known as sodium hypochlorite, or granular chlorine (calcium hypochlorite).
For liquid chlorine, the dosage is 2 gallons of shock per 10,000 gallons of water. For granular chlorine, the dosage is 1 pound of shock per 10,000 gallons of water.
Ensure to keep the pump running during shock treatment. Also, keep the pool filter running for at least 24 hours after shock treatment. Plus, avoid pouring liquid chlorine directly into the pool. Instead, mix it with water in a bucket, swish, and pour it out evenly over the surface of the water.
Why do I have cloudy pool water?
A cloudy pool happens when the pH levels are too high or low. Also, cloudy water happens if there’s too much chlorine in the water.
Can I shock my pool with soda ash?
You cannot shock a pool with baking soda, as it doesn’t contain chlorine. To shock a swimming pool, use either calcium hypochlorite or sodium hypochlorite.
How can I decrease the pH level of my pool?
You can use PH reducer, such as sodium bilsulfate or muriatic acid.
I hope this blog answers your question of whether you can shock pool after adding baking soda. Shock treatment is possible as long as the amount of baking soda added helps achieve a balanced pH that provides an ideal environment for chlorine to work effectively.
However, for shock treatment to be effective, you must know the correct dosage based on the current chlorine level. You can use the dosage we recommended, or better still, follow the label instructions.